Amethyst and Pearl Bracelet Set

Click on image to view larger version.

What you will need

> 1 x GPL104 - Ribtex Glass Pearls 4mm White
> 1 x GPL204 - Ribtex Glass Pearls 6mm White
> 1 x GPL404 - Ribtex Glass Pearls 10mm White
> 1 x PST332 - Ribtex Gemstones Round 6-8mm Amethyst
> 1 x JF534 - Ribtex Bead Caps Adjustable Silver
> 1 x JF868 - Ribtex Feature Oval Rings 20x40mm Silver
> 1 x JF106 - Ribtex Lobster Clasp Silver
> 1 x JF112 - Ribtex Jump Rings 7mm Silver
> 1 x JF351 - Ribtex Head Pins Silver
> 1 x JF184 - Ribtex Eye Pins Silver
> 1 x JF110 - Shepherd Hooks Silver

Let's Get Started

Step 1
Thread a silver bead cap onto an eye pin followed by a 10mm pearl and another bead cap.  Cut the excess off the eye pin, leaving approximately 7mm of pin.  Turn the end of the eye pin into a loop.  Repeat to make three pearl eye pins.

Step 2
Thread a 8mm Amethyst bead onto a head pin followed by a 6mm pearl.  Cut the excess off the head pin, leaving approximately 7mm on pin.  Turn the end of the head pin into a loop.  Repeat to make six head pins in total.

Step 3
Thread a 6mm Amethyst bead onto a head pin followed by a 4mm pearl.  Cut the excess off the head pin, leaving approximately 7mm on pin.  Turn the end of the head pin into a loop.  Repeat to make six head pins in total.

Step 4
Attach one bead unit from Step 2 and one bead unit from Step 3 on to a jump ring.

Step 5
Thread a 6mm pearl onto a head pin followed by a 6mm Amethyst bead.  Cut the excess off the head pin, leaving approximately 7mm on pin.  Turn the end of the head pin into a loop.  Repeat to make six head pins in total.

Step 6
Start to assemble your bracelet by using jump rings to link the following elements together to form a chain.  Lobster clasp, jump ring, pearl eye pin (from step 1), jump ring, oval ring, jump ring, pearl eye pin, jump ring, oval ring, jump ring, pearl eye pin, jump ring, oval ring.  Finish with two jump rings.

Step 7
Now decorate the chain by adding the bead units from Step 4 and and Step 5 onto the jump rings on either side of the oval loops to create your bead clusters.

Your bracelet is now complete.


Earrings

Let's Get Started

Step 1
Thread a silver bead cap onto a head pin followed by a 10mm pearl and a 8mm amethyst bead.  Cut the excess off the head pin, leaving approximately 7mm of pin.  Turn the end of the head pin into a loop.

Step 2
Use a jump ring to join the loop of the shepherd hook, the oval ring and the head pin together.

Step 3
Repeat to make the second earring.